Blog

Wall sticker mould: iHeir-ECO at 0.5%-1.0% on PVC resin for the film, iHeir-D gas-phase paper at 0.1-0.2 g per sheet for the release paper.

Shoe insole mould is dosed on two lines: iHeir-FP at 0.5%-1.5% on foam weight in the EVA base, iHeir-BJ at 2%-3% o.w.f. on the fabric top.

Woven label mould is treated by material: iHeir-BJ at 2%-3% o.w.f. in the webbing padding bath, iHeir-D gas-phase paper at 0.1-0.2 g per sheet for hang tags.

PVC rain boot mould is treated by material: iHeir-ECO at 0.5%-1.0% in the PVC boot compound at injection, iHeir-BJ at 2%-3% o.w.f. in the knit lining.

Garment trim mould is treated by material: iHeir-IPL at 0.8%-1.0% in the moulded zips and buttons, iHeir-BJ at 2%-3% o.w.f. in the webbing and labels.

EPE foam mould is dosed at the foaming stage: iHeir-FP at 0.5%-1.5% on foam weight, or iHeir-ECO in the PE masterbatch at 0.3%-0.5%.