Solutions Cases

Snowboard mould: soak the core in iHeir-M5 at 1:40 to 15%-20% weight gain, dry to spec, then bond dry top sheets with iHeir-JS at 1%-2% of glue.

Desk lamp mould: iHeir-JS117 at 0.5%-1.0% of finished weight in the shade compound, and one iHeir-D vapour sheet at 0.1-0.2 g in the hollow base and carton.

Switch plate mould: iHeir-IPL at 0.8%-1.0% of PC weight in the panel compound, and brass inserts bagged with one iHeir-D vapour sheet at 0.1-0.2 g of active.

FRP mould: iHeir-IPL at 0.8%-1.0% of resin in the mix, plus one iHeir-D vapour sheet between demoulded parts at 0.1-0.2 g of active.

Umbrella mould: iHeir-BJ at 2%-3% o.w.f. in the canopy dye bath, ribs dried before sleeving, and one iHeir-D vapour sheet per sleeve.

Office chair mould: iHeir-BJ at 2%-3% o.w.f. on the mesh seat in a 21-50C bath, plus iHeir-FP at 0.5%-1.5% of foam weight on the moulding line.