Solutions Cases

Electric hammer mould is held back in two stages: iHeir-D paper at 0.1-0.2g per sheet in the carton, T-1000 desiccant sticks at 8-10 per 20ft container.

Angle grinder mould is handled twice: iHeir-JS117 at 0.5-1.0% of part weight in the plastic housing, iHeir-JS at 1-2% of glue weight in the gearbox sealant.

Power drill mould is handled on two lines: iHeir-JS117 at 0.5-1.0% of part weight in the housing compound, iHeir-ECO at 0.3-1.0% in the over-moulded grip.

Mould prevention on exported lighting fixtures starts at the packing: iHeir-D paper at 0.1-0.2g per sheet in the carton, T-1000 sticks at 8-10 per 20ft box.

Lighting fixture mould is handled on two lines: iHeir-IPL at 0.8%-1% in the moulding compound and iHeir-TQ at 2%-3% in the coating, each on its own basis.

Lighting fixture mould is dosed by substrate: iHeir-ECO at 0.3%-1.0%, iHeir-IPL at 0.8%-1% for transparent shades, and the holder handled in the coating.