Solutions Cases

Automotive interior part mould after assembly is a damp problem: keep the line under 60% RH, iHeir-D 0.1-0.2 g per sheet, T-1000 8-10 sticks per 20ft box.

Automotive interior part mould needs two separate points: iHeir-FP 0.5%-1.5% on foam weight (pH 1-11) and iHeir-ECO 0.5%-1.0% in the PVC skin compound.

Automotive interior part mould takes two material lines: iHeir-ECO 0.3%-1.0% on part weight for moulded parts, iHeir-BJ 2%-3% o.w.f. for fabric covers.

Consumer electronic accessory damp on export: hold assembly and the store below 60% RH, and use iHeir-D sheets at 0.1-0.2 g per sheet in the carton.

Two routes for consumer electronic accessory mould: iHeir-JS117 at 0.5%-1.0% in the PVC or PU coating, iHeir-ECO at 0.3%-1.0% in the part body.

Consumer electronic accessory mould: iHeir-ECO at 0.3%-1.0% for the moulded parts and iHeir-IPL at 0.8%-1.0% for pale and clear parts.