Solutions Cases

Shade net mould: pre-mix iHeir-ECO at 0.3%-0.5% on PE/PP at the tape line, or iHeir-IPL at 0.8%-1% for clear film. A surface spray will not hold.

Woven bag mould: pre-mix iHeir-ECO at 0.3%-0.5% on resin at the tape line, dose the coating layer separately, and use iHeir-IPL at 0.8%-1% for pale bags.

Moulded pulp tray mould: dose iHeir-BCA dry powder at 0.5%-0.75% in the furnish and iHeir-TQ coating agent at 2%-3%; drying alone will not stop regrowth.

Nonwoven mould: pad iHeir-PG at 20-40 g/L with 70% pickup, immerse at 2-4% o.w.f., or spray at 25-50x dilution; switch to iHeir-BJ for mould-led work.

Textile garment mould: pad iHeir-BJ at 2-3% o.w.f., add iHeir-333 at 2-3% o.w.f. for skin-contact antibacterial, and run iHeir-PG at 20-40 g/L on roll lines.

Umbrella fabric mould: pad iHeir-666 at 8-20 g/L on polyester or 20-50 g/L on poly-cotton, run iHeir-BJ at 2-3% o.w.f. as a separate pass, then treat the frame.