Solutions Cases

Carpet mould: pad iHeir-PG at 20-40 g/L or immerse at 2-4% o.w.f., run iHeir-BJ at 2-3% o.w.f. on wool, and dose the backing latex as well.

Sanitary ware mould: add iHeir-AM04 at 6-8% of glaze solids, protect stone with iHeir-M300, and dose iHeir-ECO at 0.3-1.0% on plastic parts.

Appliance mould: dose iHeir-ECO at 0.3-1.0% of part weight, switch hot parts to iHeir-IPI001 at 0.8-1.0%, and run iHeir-GG907 at 1.5-2.0% in the rubber seal.

Mattress mould: dose iHeir-FP at 0.5-1.5% of foam weight, iHeir-ECO at 0.3-1.0% on latex, and finish the fabric layer with iHeir-F50.

Car interior mould: dose iHeir-FP at 0.5-1.5% on foam weight, iHeir-ECO at 0.3-1.0% on plastic parts, and treat formed fabrics by padding.

Adhesive mould: dose iHeir-JS at 1-2% for neutral water-based glues, iHeir-JS7 at 1-2% below pH 6, and never use iHeir-G above pH 8.