Solutions Cases

Power bank mould: iHeir-JS117 at 0.5%-1.0% in the PC shell compound, plus iHeir-D vapour sheets at 0.1-0.2g of active matter per sheet in the retail box.

Energy storage battery pack mould: iHeir-JS117 at 0.5%-1.0% in the cell-holder compound, plus T-1000 rods at 8-10 per 20ft container before the panels close.

Robot vacuum mould: dose iHeir-IPI001 at 0.8%-1.0% into the ABS shell compound, then finish the roller brush fibre with iHeir-BJ at 2%-3% o.w.f.

Stationery mould runs on two lines: paper books take iHeir-D sheet at 0.1-0.2g of active matter, pen barrel compound takes iHeir-JS117 at 0.5%-1.0%.

Bicycle mould picks the saddle foam, grips and tyre compound, not the frame: iHeir-FP at 0.5%-1.5% of foam weight, iHeir-JS117 at 0.5%-1.0% of compound weight.

Watch mould sits on the strap lining and the box interior: iHeir-PF at 0.05%-0.2% on hide weight at fatliquoring, plus iHeir-D paper at 0.1-0.2g per sheet.