Solutions Cases

Motor mould: iHeir-JS117 at 0.5%-1.0% in plastic end caps and terminal-box covers, retested for insulation, plus iHeir-D sheets beside the foam inserts.

Switchgear cabinet mould: iHeir-JS117 at 0.5%-1.0% in DMC and PA supports, retested for insulation and flame, plus T-1000 rods sized to cabinet volume.

Transformer mould: iHeir-D sheets at 0.1-0.2g active matter between pressboard layers, plus T-1000 rods at 8-10 per 20ft container for crate and sea.

Circuit breaker mould: iHeir-JS117 at 0.5%-1.0% in the flame-retardant shell, retested for flame and electrical ratings, plus iHeir-D sheets in the carton.

Rubber hose mould starts in the bore: iHeir-JS117 at 0.5%-1.0% of inner tube compound, a dry bore after pressure testing, iHeir-D sheets at 0.1-0.2g.

Carton sealing tape mould: iHeir-JS at 1%-2% of adhesive weight in the water-based tank, plus iHeir-D vapour sheets at 0.1-0.2g each in the core and carton.