Solutions Cases

LED display mould: iHeir-JS117 at 0.5%-1.0% of part weight in PC shells and masks, plus 8-10 T-1000 sticks per 20ft container.

Glassware mould: swap paper dividers for iHeir-D vapour sheets at 0.1-0.2g of active matter, and hang 8-10 T-1000 desiccant sticks per 20ft container.

Denim mould: iHeir-BJ at 2%-3% o.w.f. in the sizing stage at pH 4.5-8.5, plus one iHeir-D vapour sheet per roll after the moisture check.

Wooden door mould: soak the core board at 1:40 to 15%-20% weight gain, then brush lock holes, hinge slots and end grain with the same liquor.

Acrylic sheet mould under the film: iHeir-IPL at 0.8%-1.0% in the cast syrup, a dry wipe before filming, and iHeir-D sheets between panels.

Colour steel sandwich panel mould: iHeir-FP at 0.5%-1.5% of foam weight, plus iHeir-D sheets at 0.1-0.2g under and over each panel stack.