Solutions Cases

Bubble wrap mould runs in two stages: iHeir-JS117 at 0.5%-1% of finished weight in the film, then desiccant packs holding the store dry for 270-300 days.

Stretch film mould sits in surface and between layers: iHeir-JS117 at 0.5%-1% of resin weight, iHeir-ECO at 0.3%-0.5% on the polyethylene, not sprayed on.

Honeycomb board mould starts in the core cells: iHeir-JS at 1.0%-2.0% of glue weight in the core trough, a dry-solids batch for the facing, iHeir-D at 0.1-0.2g.

Dishwasher mould starts in the door gasket folds: iHeir-GGTK at 1%-2% in the silicone below 200C, iHeir-JS117 at 0.5%-1% in the inner plastic parts.

Range hood mould grows on the plastic impeller and the sprayed film: iHeir-JS117 at 0.5%-1% of finished weight, iHeir-YQ at 1%-1.5% in the paint.

Sink mould sits in the drain sealant and the damping pad, not the steel: iHeir-JS at 1.0%-2.0% of the glue weight, iHeir-FP at 0.5%-1.5% of the foam weight.