Solutions Cases

Leather glove mould sits in the flesh side, stitch holes and lining: iHeir-PF 0.05%-0.2% on hide weight below pH 8, iHeir-BJ 2%-3% o.w.f.

Rain boot mould starts in the lining inside the shaft, not on the rubber: iHeir-JS117 0.5%-1.0% in the compound, iHeir-BJ 2%-3% o.w.f. on the lining.

Wiring harness mould: the migrated plasticiser layer and the terminal cavity. iHeir-JS117 0.5%-1.0% in the sheath, iHeir-PSZ104 0.5%-1.0% in connectors.

Photographic equipment mould starts on coated glass and inside the lens barrel. iHeir-IPL at 0.8%-1.0% in the barrel compound, assembly room at 50% RH.

Hardware tool mould sits on the overmoulded grip and carton liner, not on the steel. iHeir-JS117 at 0.5%-1.0% in the grip compound; iHeir-D paper per box.

Cable mould starts on the inner PVC sheath face. Dose iHeir-JS117 at 0.5%-1.0% of sheath weight in cold mixing, extrusion below 190C.