Solutions Cases

Energy storage unit mould sits on the shell and the over-moulded seals. iHeir-JS117 at 0.5%-1.0% of finished weight, iHeir-GGTK at 1%-2% in silicone overmoulds.

PV module mould shows first in the frame glue line and on junction box housings. iHeir-GGTK at 1%-2% in the sealant, iHeir-JS117 at 0.5%-1.0% in the housing.

Charging pile mould starts at the gasket and the cable jacket. iHeir-JS117 at 0.5%-1.0% of product weight, iHeir-GGTK at 1%-2% in silicone seals.

Collapsible bucket mould starts at the fold lines. iHeir-JS117 at 0.5%-1.0% of product weight, iHeir-GGTK at 1%-2% in silicone seals.

Trekking pole mould starts in the EVA foam grip; the shaft coating is the second place. iHeir-FP at 0.5%-1.5% of foam weight, iHeir-YQ at 1%-1.5% in the paint.

Cooler box mould comes from the PU foam layer and the moulded shell. iHeir-FP at 0.5%-1.5% of foam weight, iHeir-ECO at 0.3%-1.0% of part weight.